Foam Pump Cavity Insulation

Foam Pump(KEXON) provides an alternate solution to empty cavity insulation. It provides superior R-value at 4.6 R per inch and expands to ensure there are no voids in the cavities. Installation is performed by pumping foam through holes drilled in block, brick, or any other material where cavities are needed to be filled. Traditionally used for block buildings, cavity fill pump foam can also be installed in existing homes and buildings where no insulation currently exists. This provides a much more efficient and comfortable building.

Cavity fill pump foam is considered to be an alternate solution to empty cavity insulation. It can provide superior R value to the areas that it is used. One of the keys to the performance of this insulation is the ability to fill any voids that are present where many other insulation types cannot be used.

Cavity Fill Pump Foam has several different applications. It can be used for:

Block core fill

Inside the walls of existing homes

Open cavities or spaces

It can be used in both new construction and in existing structures depending on the areas needing addressed. The amount of time that it takes to install the insulation can be much less than other types of insulation. The foam is pumped into the empty cavities by drilling holes through the block, brick or any other material where the empty cavities or voids are present. There is no need to tear down the walls to access the empty space. This provides tremendous cost and time savings for many buildings.